How Do To Change Ray-Bans Temples/Frame Arms? - Guide

Our glasses' temples can deteriorate over time and break in half. At glassestools.com, we show you how to change temples of Ray-Bans.

How Do To Change Ray-Bans Temples/Frame Arms?

We will guide you through each step.

1. A precision screwdriver is necessary to replace your temples and frame arms. If possible, a pair or tweezers are also required. It can be difficult to pick up small screws with your hands.
2. Metal frames usually have two screws. There are two screws in metal frames: one for the lenses and one for the temples. You must unscrew the frame arm screw. There is usually only one screw for frames made of acetate or plastic.
3. After the screws are removed, you can place them in a secure location so they don't roll away. Then adjust the temple. To insert the screw, place the arm frame at 45 degrees facing you. Then use the pliers to place it in the hole.
4. Tighten our screw.
5. Now our temple has been transformed!

Although it is quite straightforward, there are always things that can vary or use an unusual mechanism. We are happy to answer any questions you may have, as you know.