Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Pop Out Tiffany Sunglass Lenses

Are you tired of your old Tiffany sunglasses and want to give them a fresh new look? Well, one way to do that is by popping out the lenses and replacing them with new ones. In this article, we will guide you through the process of popping out Tiffany sunglass lenses, step by step. So, grab your sunglasses and let's get started!

1. Gather Your Tools:
Before you begin, make sure you have all the necessary tools. You will need a microfiber cloth, a small screwdriver, a lens-popping tool (optional), and replacement lenses that fit your Tiffany sunglasses.

2. Find the Lens Screws:
Most Tiffany sunglasses have screws holding the lenses in place. Look for small screws on the inside of the frame near the lenses. Use the small screwdriver to carefully loosen and remove these screws. Be sure to keep them in a safe place, as you will need them later.

3. Apply Pressure:
Next, hold the sunglasses firmly in one hand and use your other hand to apply gentle pressure on the back of the lens. Start from the outer edges and work your way towards the center. The goal is to loosen the lens from its frame.

4. Use a Lens-Popping Tool (Optional):
If you're having trouble popping out the lens with your hands alone, you can use a lens-popping tool. This tool is specifically designed to help remove lenses from sunglasses. Simply insert the tool between the frame and the lens, and gently push until the lens pops out.

5. Repeat for the Second Lens:
Once you've successfully popped out the first lens, repeat the process for the second lens. Remember to be gentle and apply even pressure to avoid damaging the sunglasses or the lenses.

6. Clean the Frame:
With both lenses removed, take a moment to clean the frame of your Tiffany sunglasses. Use a microfiber cloth to wipe away any dust, dirt, or smudges. This will ensure that your sunglasses look their best when you insert the new lenses.

7. Insert the New Lenses:
Now it's time to insert the new lenses into your Tiffany sunglasses. Start by placing one lens into the frame, aligning it with the holes where the screws were. Once the lens is in position, carefully insert the screws and tighten them using the small screwdriver. Repeat this process for the second lens.

8. Check for Proper Alignment:
After inserting the new lenses, check to make sure they are properly aligned. Put on the sunglasses and look in the mirror. The lenses should be centered and level. If they appear crooked, you may need to adjust the screws slightly until they are aligned correctly.

9. Tighten the Screws:
Once you are satisfied with the alignment, tighten the screws securely. Be careful not to overtighten, as this can damage the frame or the lenses.

10. Clean the New Lenses:
Before you start wearing your revamped Tiffany sunglasses, give the new lenses a thorough cleaning. Use a microfiber cloth and lens cleaner to remove any fingerprints or smudges. This will ensure that your sunglasses provide clear vision and look their best.

11. Enjoy Your New Look:
Congratulations! You have successfully popped out the old lenses from your Tiffany sunglasses and replaced them with new ones. Now, it's time to enjoy your revamped sunglasses and show off your stylish new look.

Conclusion:
Popping out Tiffany sunglass lenses may seem like a daunting task, but with the right tools and a little patience, it can be easily accomplished. By following the steps outlined in this article, you can give your old sunglasses a fresh new look and enjoy wearing them again. So, go ahead and give it a try – you'll be amazed at the difference a simple lens replacement can make!