Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Pop Out Versace Sunglass Lenses

Hey there! Are you tired of struggling to replace the lenses in your Versace sunglasses? Well, worry no more! In this handy guide, I'll walk you through the step-by-step process of popping out the lenses from your Versace sunglasses. Whether you want to switch to prescription lenses or replace a damaged lens, this article has got you covered. So, let's dive in and get your sunglasses looking brand new again!

Gather the Tools You'll Need
Before we get started, it's important to have the right tools at hand. Here's a list of what you'll need:

Safety First!
Before you begin, ensure that you're working in a safe and well-lit area. It's also a good idea to wear protective gloves to avoid any accidental injuries.

Identify the Lens Type
Versace sunglasses come in various lens types, including polarized, mirrored, or gradient. Identifying the type of lens you have is crucial, as it may affect the removal process. Take a close look at your sunglasses to determine the lens type.

Locate the Lens Screws
Most Versace sunglasses have small screws holding the lenses in place. Look for these screws on the inner side of the frame near the lenses. They are usually located near the bridge or the hinges.

Remove the Screws
Using a small screwdriver that fits the screw head, carefully unscrew the screws. Be gentle and make sure not to apply excessive force, as this could damage the frame or the lens. Place the screws in a safe spot to avoid losing them.

No Screws? No Problem!
If your Versace sunglasses don't have screws, don't worry! Some models feature a snap-in lens system. In this case, you can skip the screw removal step and proceed to the next one.

Apply Heat (For Snap-In Lenses)
If your sunglasses have snap-in lenses, you'll need to heat them slightly to make the removal easier. Use a hairdryer on low heat and direct it towards the lens for a few seconds. Be careful not to overheat the lens or the frame.

Gently Push the Lens Out
Once the screws are removed or the lens is heated, it's time to pop out the lens. Hold the frame firmly with one hand and use your other hand to gently push the lens from the front side. Apply even pressure around the edges of the lens until it pops out. Be patient and avoid using excessive force to prevent any damage.

Repeat the Process
If your sunglasses have two lenses, repeat the previous steps to remove the second lens. Remember to be gentle and take your time. Rushing could lead to accidental damage.

Clean and Inspect
Now that you have successfully removed the lenses, it's time to clean them and inspect the frame for any dirt or debris. Use a mild soap or lens cleaner and a soft cloth to clean the lenses. Take this opportunity to also clean the frame and remove any dust or smudges.

Inserting New Lenses
If you're replacing the lenses with new ones, follow the manufacturer's instructions for inserting them. Ensure that the new lenses fit securely and align properly with the frame.

Reassemble the Sunglasses
Once the lenses are in place, it's time to reassemble your Versace sunglasses. If you had screws, carefully insert them back into their original positions and tighten them gently. For snap-in lenses, simply press them back into the frame until they snap into place.

Final Touches
Give your sunglasses a final wipe to remove any fingerprints or smudges. Admire your handiwork and enjoy your refreshed Versace sunglasses!

Congratulations! You've successfully learned how to pop out Versace sunglass lenses. With the right tools and a gentle touch, you can easily replace or switch out lenses to keep your sunglasses looking stylish and functional. Remember to take your time, follow the steps carefully, and always prioritize safety. Now go out there and rock your new lenses with confidence!