Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Put The Lens Back Into Prada Sunglasses

Hey there, sunglasses enthusiasts! We've all been there – the heart-sinking moment when a lens pops out of our beloved Prada sunglasses. But fear not! In this guide, we'll walk you through the process of putting the lens back into your Prada sunglasses, ensuring you can rock that stylish eyewear once again. So, let's dive in and get those lenses back where they belong!

1. Assess the Situation:
Before we jump into the lens-reinsertion process, let's take a moment to assess the situation. Is the lens fully intact, or do you need to replace it? If it's just a matter of reinserting the lens, we can proceed. However, if the lens is damaged, it's best to contact a professional or seek assistance from Prada's customer service.

2. Gather Your Tools:
To successfully put the lens back into your Prada sunglasses, you'll need a few tools. Grab a clean microfiber cloth, a small screwdriver (preferably with a flat head), and a pair of tweezers. Having these on hand will make the process smoother and reduce the risk of damaging your sunglasses.

3. Clean the Lens and Frame:
Before reinserting the lens, it's essential to ensure both the lens and frame are clean. Use the microfiber cloth to gently remove any dirt, smudges, or fingerprints from the lens. Additionally, wipe the frame to ensure there are no obstructions that could hinder the lens insertion process.

4. Identify the Lens Groove:
Most Prada sunglasses have a groove or channel where the lens fits snugly. Take a close look at the frame to locate this groove. It's usually on the inner side of the frame, near the edge where the lens should be placed.

5. Align the Lens:
Now that you've identified the lens groove, it's time to align the lens properly. Hold the lens between your thumb and forefinger and position it so that the curved side matches the curvature of the frame. Ensure that the lens is oriented correctly, with the front side facing outward.

6. Insert the Lens:
With the lens aligned, it's time to carefully insert it into the groove. Start by placing one side of the lens into the groove, ensuring it fits snugly. Use your other hand to gently press the opposite side of the lens into place, applying even pressure. Take your time and be gentle to avoid any accidental damage.

7. Check for Proper Alignment:
Once the lens is in place, check for proper alignment. Look through the sunglasses and ensure the lens is centered and level. If the lens appears crooked or misaligned, gently adjust it using your fingertips until it sits perfectly.

8. Secure the Lens:
To prevent the lens from popping out again, it's essential to secure it properly. Some Prada sunglasses have small screws on the inner side of the frame that hold the lens in place. If your sunglasses have these screws, use the small screwdriver to tighten them gently. Be careful not to overtighten, as it may cause damage.

9. Finishing Touches:
After securing the lens, give your sunglasses a final wipe with the microfiber cloth to remove any smudges or fingerprints that may have occurred during the process. Admire your handiwork and get ready to rock your Prada sunglasses once again!

Putting the lens back into your Prada sunglasses may seem like a daunting task, but with the right tools and a little patience, it's a task you can easily conquer. Remember to assess the situation, gather your tools, clean the lens and frame, align the lens, insert it carefully, check for proper alignment, secure the lens if necessary, and give your sunglasses a final wipe. Now, you're all set to enjoy the sun in style with your Prada sunglasses back in action!