Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Put The Lens Back Into Ray Ban Sunglasses

Hey there sunglasses enthusiasts! Have you ever found yourself in a situation where the lens of your beloved Ray Ban sunglasses pops out? It can be quite frustrating, but fear not! In this guide, we will walk you through the step-by-step process of putting the lens back into your Ray Ban sunglasses. So grab your shades and let's get started!

Gather Your Tools
Before we dive into the lens replacement process, it's important to gather the necessary tools. You will need a small screwdriver, a lens cleaning cloth, and a clean, flat surface to work on. Make sure you have these handy before proceeding to the next step.

Assess the Damage
Take a close look at your sunglasses and identify any damage or misalignment. If the lens has simply popped out, examine it for any scratches or cracks. If the lens is damaged, it may be best to replace it entirely. However, if it's in good condition, we can proceed to the next step.

Remove the Frame Screws
Using the small screwdriver, carefully remove the screws that hold the frame together. Be gentle and make sure to keep track of the screws to avoid losing them. Once the screws are removed, gently separate the frame to access the lens.

Clean the Lens
Before reinserting the lens, take a moment to clean it thoroughly. Use a lens cleaning cloth to remove any smudges or dirt that may have accumulated. Cleaning the lens ensures optimal visibility and prevents any debris from scratching the surface.

Align the Lens
Now comes the tricky part – aligning the lens. Hold the lens up to the frame and check for any notches or grooves that indicate the correct orientation. Carefully insert the lens into the frame, making sure it sits securely in place. If you encounter resistance, double-check the alignment and try again.

Secure the Frame
With the lens in place, it's time to secure the frame back together. Align the frame halves and carefully insert the screws back into their respective holes. Use the screwdriver to tighten the screws, but be cautious not to overtighten and strip the threads. Once the frame is securely fastened, give it a gentle shake to ensure the lens stays in place.

Test and Adjust
Put your sunglasses on and give them a test drive. Check if the lens feels secure and if the frame sits comfortably on your face. If the lens feels loose or the frame doesn't fit properly, you may need to repeat the process and make necessary adjustments. It's better to take the time to get it right than to risk losing the lens again.

Care and Maintenance
Congratulations! You've successfully put the lens back into your Ray Ban sunglasses. To ensure their longevity, it's important to take proper care of your shades. Clean the lenses regularly, store them in a protective case when not in use, and avoid exposing them to extreme temperatures or rough handling.

When to Seek Professional Help
While replacing the lens in your Ray Ban sunglasses can often be done at home, there may be instances where professional assistance is required. If you encounter any difficulties during the process or if your sunglasses have complex frame designs, it's best to consult an expert. They have the knowledge and tools to handle delicate repairs.

Putting the lens back into your Ray Ban sunglasses doesn't have to be a daunting task. With a little patience and attention to detail, you can restore your shades to their former glory. Remember to gather your tools, assess the damage, clean the lens, align it properly, secure the frame, and test for a perfect fit. By following these steps, you'll be rocking your Ray Bans in no time!

So, why wait? Grab your sunglasses and let's get those lenses back where they belong – on your stylish Ray Bans!