Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Remove Your Ray-Ban Sunglass Lenses Without Damaging Them

Have you ever found yourself struggling to remove the lenses from your beloved Ray-Ban sunglasses? Fear not, for we have got you covered! In this guide, we will walk you through the process of safely removing your Ray-Ban sunglass lenses without causing any damage. So, grab your sunglasses and let's dive in!

Gather the necessary tools

Before you begin, make sure you have the following tools ready:

1. A clean, soft cloth
2. A small screwdriver or lens removal tool
3. A flat surface to work on
4. Patience and a steady hand

Identify the lens type

Ray-Ban sunglasses come in various lens types, such as polarized, mirrored, or gradient lenses. It's important to identify the type of lenses you have before attempting to remove them. Each lens type may require a slightly different approach.

Remove the screws (if applicable)

Some Ray-Ban sunglasses have screws holding the lenses in place. If your sunglasses have screws, you will need to remove them first. Use a small screwdriver or a lens removal tool to carefully unscrew them. Keep the screws in a safe place to avoid losing them.

Apply gentle pressure

Once the screws are removed (if applicable), it's time to remove the lenses. Place your sunglasses on a flat surface with the front side facing down. Hold the frame firmly with one hand and use your other hand to apply gentle pressure on the lens from the backside. Start from one corner and slowly work your way around the lens, applying equal pressure.

Wiggle the lens

If the lens doesn't come out easily, you can try gently wiggling it from side to side while maintaining the pressure. This motion can help loosen the lens from its frame. Be careful not to apply excessive force, as it may lead to lens or frame damage.

Repeat the process for the other lens

Once you successfully remove the first lens, repeat the same process for the other lens. Remember to be patient and take your time to avoid any mishaps.

Clean the lenses and frame

With both lenses removed, it's an excellent time to clean them along with the frame. Use a clean, soft cloth to wipe away any dust or smudges. Be gentle to avoid scratching the lenses.

Reinstall the lenses

After cleaning, it's time to reinstall the lenses. Start by aligning the lens with the frame, ensuring it fits snugly. Apply gentle pressure around the edges until the lens clicks into place. If your sunglasses have screws, reinsert them and tighten them carefully.

Perform a final check

Once both lenses are securely in place, give your sunglasses a final check. Ensure that they are aligned correctly and sit flush with the frame. If everything looks good, congratulations! You have successfully removed and reinstalled your Ray-Ban sunglass lenses without any damage.

Tips for extra care

To keep your Ray-Ban sunglasses in top condition, here are a few tips:

1. Avoid using excessive force when removing or installing the lenses.
2. Clean your sunglasses regularly with a soft cloth to prevent scratches.
3. Store your sunglasses in a protective case when not in use.
4. Avoid exposing your sunglasses to extreme temperatures or harsh chemicals.


Removing your Ray-Ban sunglass lenses doesn't have to be a daunting task. By following these simple steps and using the right tools, you can safely remove and reinstall your lenses without causing any damage. Remember to be patient, take your time, and handle your sunglasses with care. Now, go ahead and enjoy your crystal-clear vision with your newly cleaned Ray-Ban sunglasses!