Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Replace Maui Jim Kahuna Lenses

Hey there! Are you a proud owner of a pair of Maui Jim Kahuna sunglasses? These sunglasses are known for their exceptional quality and stylish design. However, just like any other sunglasses, the lenses can get scratched or damaged over time. But fret not! In this article, we will guide you through the process of replacing the lenses in your Maui Jim Kahuna sunglasses. So, let's dive in and get those sunglasses looking as good as new!

1. Assessing the Damage:
The first step is to carefully examine your sunglasses and determine the extent of the damage. Are the lenses scratched, cracked, or completely broken? This will help you decide whether you need to replace just one lens or both.

2. Gather the Tools:
Before you start the replacement process, make sure you have all the necessary tools at hand. You will need a microfiber cloth, a small screwdriver, lens cleaner, and of course, the replacement lenses. It's important to use genuine Maui Jim replacement lenses to ensure the best fit and optical performance.

3. Removing the Old Lenses:
To remove the old lenses, locate the small screws on the inner side of the frame near the lenses. Use the small screwdriver to gently unscrew them. Be careful not to apply too much pressure, as you don't want to damage the frame. Once the screws are removed, carefully lift the lenses out of the frame.

4. Cleaning the Frame:
Now that the old lenses are out, take a moment to clean the frame using a microfiber cloth. This will help remove any dust or debris that may have accumulated over time. A clean frame will ensure a smooth and secure fit for the new lenses.

5. Installing the New Lenses:
Take the replacement lenses and align them with the frame. Start by inserting one corner of the lens into the frame groove and gently press it down. Slowly work your way around the lens, applying even pressure until it snaps into place. Repeat the process for the second lens if necessary.

6. Securing the Lenses:
Once the new lenses are in place, locate the screw holes on the inner side of the frame. Carefully insert the screws and use the screwdriver to tighten them. Be cautious not to overtighten, as it may damage the frame. Ensure the lenses are securely fastened before moving on to the next step.

7. Cleaning and Polishing:
Now that your sunglasses have brand new lenses, give them a thorough cleaning and polishing. Use a lens cleaner and the microfiber cloth to remove any smudges or fingerprints. This will not only improve the clarity of your lenses but also enhance their overall appearance.

8. Final Inspection:
Before you put on your sunglasses, take a moment to inspect the lenses for any visible defects or misalignments. If you notice any issues, repeat the installation process or seek professional assistance. It's important to ensure that the lenses are properly installed for optimal performance and protection.

9. Enjoy Your Revived Sunglasses:
Congratulations! You have successfully replaced the lenses in your Maui Jim Kahuna sunglasses. Put them on and bask in the satisfaction of having a pair of sunglasses that look as good as new. Now you can confidently step out into the sun and enjoy the world through crystal-clear lenses.

Replacing the lenses in your Maui Jim Kahuna sunglasses is a simple process that can breathe new life into your favorite eyewear. By following the steps outlined in this article, you can easily replace the lenses at home and save yourself the cost of buying a new pair. So, don't let scratched or damaged lenses hold you back from enjoying the sun. Get those replacement lenses and keep rocking your stylish Maui Jim Kahuna sunglasses!