Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Replace Oliver Peoples Brodsky Lenses

Have you noticed that your beloved Oliver Peoples Brodsky sunglasses are not providing the same crystal-clear vision as they used to? Perhaps the lenses have become scratched or damaged over time, hindering your ability to enjoy the world through those stylish frames. Fret not! In this guide, we will walk you through the process of replacing the lenses on your Oliver Peoples Brodsky sunglasses, ensuring that you can continue to rock your favorite shades with perfect clarity. So, let's dive in and get those lenses replaced!

1. Gather the necessary tools and materials

Before you begin the lens replacement process, it's essential to have all the tools and materials you'll need. Here's a list to get you started:

- Replacement lenses for Oliver Peoples Brodsky sunglasses
- Microfiber cloth or lens cleaning solution
- Screwdriver or eyeglass repair kit
- Tweezers or a small pair of pliers
- Soft cloth or towel

2. Remove the old lenses

To replace the lenses on your Oliver Peoples Brodsky sunglasses, you'll first need to remove the old ones. Follow these steps:

Step 1: Lay a soft cloth or towel on a flat surface to prevent any damage to the sunglasses.

Step 2: Locate the small screws that hold the lenses in place. These screws are usually located on the inner side of the frames near the temples.

Step 3: Use a screwdriver or an eyeglass repair kit to carefully unscrew these screws. Be sure to keep them in a safe place, as you'll need them later.

Step 4: Once the screws are removed, gently lift the lenses out of the frames using tweezers or pliers. Take care not to apply too much pressure, as this could cause damage to the frames.

3. Clean the frames

Now that the old lenses are removed, it's a good idea to clean the frames before installing the new lenses. Use a microfiber cloth or lens cleaning solution to wipe away any dust, dirt, or fingerprints from the frames. This step will ensure that your new lenses are installed on a clean surface, providing optimal clarity.

4. Install the new lenses

With the frames cleaned, it's time to install the new lenses. Follow these steps:

Step 1: Take the replacement lenses and ensure they are the correct size and shape for your Oliver Peoples Brodsky sunglasses. Double-check the markings on the lenses to confirm their compatibility.

Step 2: Align the lenses with the frame openings, making sure they fit securely.

Step 3: Using the tweezers or pliers, carefully insert the screws back into the frame holes. Tighten them gently, ensuring that the lenses are held firmly in place.

Step 4: Once the lenses are securely fastened, give them a gentle wiggle to ensure they are properly seated.

5. Clean and polish the lenses

Now that the new lenses are installed, it's time to give them a final touch-up. Use a microfiber cloth or lens cleaning solution to clean any smudges or fingerprints from the lenses. This step will ensure that your sunglasses provide you with crystal-clear vision.

6. Test and enjoy your new lenses

Before you put your Oliver Peoples Brodsky sunglasses back on, it's important to test the new lenses. Put them on and look around to ensure that the vision is clear and distortion-free. If you notice any issues, double-check the screws and alignment of the lenses.


Congratulations! You have successfully replaced the lenses on your Oliver Peoples Brodsky sunglasses. By following these simple steps, you can continue to enjoy your favorite shades with perfect clarity. Remember to take care of your sunglasses and clean them regularly to maintain their longevity. Now, go out there and rock your stylish shades with confidence!