Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Replace Ray Ban Boyfriend Lenses

Hey there! Have you ever found yourself in a situation where your beloved Ray Ban Boyfriend sunglasses have a scratched or damaged lens? Don't worry, we've got you covered! In this guide, we'll walk you through the process of replacing the lenses in your Ray Ban Boyfriend sunglasses. So grab your shades and let's get started!

1. Why Replace Ray Ban Boyfriend Lenses?

Before we dive into the nitty-gritty of lens replacement, let's quickly understand why you might need to replace your Ray Ban Boyfriend lenses. Over time, wear and tear, accidental drops, or even improper cleaning can cause scratches or cracks on the lenses. These imperfections not only hinder your vision but also take away from the sleek and stylish look of your sunglasses.

2. Gather the Tools You'll Need

To replace the lenses in your Ray Ban Boyfriend sunglasses, you'll need a few essential tools. Make sure you have the following items handy:

- Replacement lenses specifically designed for Ray Ban Boyfriend sunglasses
- Microfiber cloth
- Small screwdriver
- Tweezers or a toothpick
- Lens cleaning solution (optional)

3. Remove the Old Lenses

The first step in replacing your Ray Ban Boyfriend lenses is to remove the old ones. Start by laying your sunglasses on a clean and flat surface. Look for the small screws that hold the lenses in place. Use the small screwdriver to carefully unscrew them. Keep the screws in a safe place to avoid losing them.

Once the screws are removed, gently push the lens from the backside using your thumb or a toothpick. Be cautious not to apply too much pressure to avoid damaging the frame. Repeat the process for the other lens.

4. Clean the Frame

Now that the old lenses are out, take a moment to clean the frame of your sunglasses. Use a microfiber cloth to wipe away any dust or debris. You can also use a lens cleaning solution for a thorough clean. Ensure the frame is dry before proceeding to the next step.

5. Install the New Lenses

It's time to install the fresh, new lenses into your Ray Ban Boyfriend sunglasses. Begin by aligning the replacement lens with the frame. Carefully insert one edge of the lens into the frame groove. Apply gentle pressure to snap the lens into place. Repeat the process for the other lens.

6. Secure the Lenses

Once the new lenses are in place, it's important to secure them properly. Retrieve the screws you saved earlier and use the small screwdriver to tighten them back into position. Ensure the screws are snug but not overly tight to avoid damaging the frame.

7. Clean and Inspect

Now that your Ray Ban Boyfriend sunglasses have brand new lenses, give them a final clean and inspection. Use a microfiber cloth to wipe away any fingerprints or smudges on the lenses. Take a close look at the lenses to ensure they are free from any defects or scratches.

8. Enjoy Your Fresh Shades!

Congratulations! You've successfully replaced the lenses in your Ray Ban Boyfriend sunglasses. Put them on and bask in the glory of your stylish and crystal-clear vision. Whether you're lounging by the pool or strolling down the street, your sunglasses will now be as good as new!


Replacing the lenses in your Ray Ban Boyfriend sunglasses doesn't have to be a daunting task. With a few simple tools and a little bit of patience, you can restore your shades to their former glory. Remember to take your time, follow the steps carefully, and enjoy the process. Now, go out there and rock your fresh shades with confidence!