Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Replace Ray Ban Burbank Lenses

Hey there! So, you've got a pair of Ray Ban Burbank sunglasses that you absolutely adore, but unfortunately, the lenses have seen better days. Don't worry, though! In this guide, I'm going to walk you through the process of replacing the lenses in your Ray Ban Burbank sunglasses. It's easier than you might think, and you'll have your shades looking brand new in no time. Let's get started!

Gather Your Tools
Before we dive into the lens replacement process, let's make sure you have everything you need. Here's a list of tools you'll need for this project:
1. New lenses for your Ray Ban Burbank sunglasses (make sure they are compatible with your specific model)
2. A microfiber cloth or lens cleaning solution
3. A small screwdriver set
4. Tweezers or a pair of small pliers
5. A clean, well-lit workspace

Remove the Old Lenses
First things first, let's remove the old lenses from your sunglasses. Here's how to do it:
1. Lay your sunglasses on a clean, flat surface with the lenses facing up.
2. Look for the small screws that hold the lenses in place. They are usually located near the corners of the frame.
3. Use the small screwdriver to carefully unscrew each screw and set them aside in a safe place.
4. Once the screws are removed, gently lift the old lenses out of the frame using your fingertips or a pair of tweezers.

Clean the Frame
Now that the old lenses are out, take a moment to clean the frame of your sunglasses. Use a microfiber cloth or lens cleaning solution to remove any dirt or smudges. This step will ensure a clean and clear surface for your new lenses.

Install the New Lenses
It's time to install the new lenses in your Ray Ban Burbank sunglasses. Follow these steps:
1. Carefully align the new lenses with the frame, making sure they fit snugly.
2. Once the lenses are in position, locate the screw holes on the frame.
3. Insert the small screws into the holes and use the screwdriver to tighten them. Be gentle to avoid overtightening and damaging the frame.
4. Double-check that the lenses are securely in place and that the screws are tightened properly.

Clean and Inspect
After successfully installing the new lenses, give your sunglasses a thorough cleaning. Use a microfiber cloth to remove any fingerprints or smudges from the lenses. Take a moment to inspect the lenses and frame for any imperfections or misalignments. If everything looks good, you're almost done!

Test and Adjust
Now that your Ray Ban Burbank sunglasses have fresh lenses, it's time to test them out. Put them on and check for any discomfort or distortion in your vision. If you notice any issues, such as blurry spots or a misaligned frame, you may need to make some adjustments. Use a small screwdriver or tweezers to fine-tune the fit and alignment of the frame.

Protect and Maintain
To keep your newly replaced lenses in top condition, it's important to take proper care of your sunglasses. Here are a few tips:
1. Store your sunglasses in a protective case when not in use to prevent scratches.
2. Clean the lenses regularly with a microfiber cloth or lens cleaning solution.
3. Avoid placing your sunglasses face down on hard surfaces to prevent lens damage.
4. Be mindful of extreme temperatures, as they can affect the lens quality.

Consider Professional Help
If you're not comfortable replacing the lenses yourself or encounter any difficulties during the process, it's always a good idea to seek professional help. Opticians or eyewear specialists can assist you in replacing the lenses and ensuring a perfect fit.

Congratulations! You've successfully learned how to replace the lenses in your Ray Ban Burbank sunglasses. With a little patience and the right tools, you can give your favorite shades a new lease on life. Remember to take care of your sunglasses to prolong their lifespan and enjoy clear vision for years to come. So go ahead, rock those stylish Ray Bans with confidence!