Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Replace Ray Ban Elliot Lenses

Hey there! Are you a proud owner of a pair of Ray Ban Elliot sunglasses? These stylish shades are not just a fashion statement, but also protect your eyes from harmful UV rays. However, accidents happen, and sometimes the lenses may get scratched or damaged. But worry not! In this blog post, we'll guide you through the process of replacing the lenses in your Ray Ban Elliot sunglasses. So, let's get started and bring back that crystal-clear vision!

1. Assess the damage:
Before diving into the replacement process, take a close look at your sunglasses' lenses. Identify any scratches, cracks, or other signs of damage. This will help you determine whether you need to replace both lenses or just one.

2. Gather the necessary tools:
To successfully replace the lenses, you'll need a few tools handy. These include a microfiber cloth, a small screwdriver, lens cleaner solution, lens adhesive, and of course, the replacement lenses. Make sure you have everything ready before proceeding.

3. Remove the old lenses:
Now it's time to remove the damaged lenses from your Ray Ban Elliot sunglasses. Start by locating the small screws on the inside of the frame near the lenses. Use the small screwdriver to carefully unscrew them. Once the screws are removed, gently push the lenses out from the front of the frame.

4. Clean the frame:
With the old lenses removed, it's a good idea to clean the frame before installing the new ones. Use a microfiber cloth and lens cleaner solution to wipe away any dirt or residue. This will ensure a clean surface for the new lenses to adhere to.

5. Prepare the new lenses:
Before installing the new lenses, give them a thorough cleaning using the lens cleaner solution and the microfiber cloth. Make sure they are free from any smudges or fingerprints. This step will ensure optimal clarity and vision.

6. Apply lens adhesive:
To secure the new lenses in place, apply a small amount of lens adhesive along the outer edges. Be careful not to use too much, as it may create a mess. Spread the adhesive evenly using a toothpick or a small brush.

7. Insert the new lenses:
With the adhesive applied, carefully insert the new lenses into the frame from the front. Make sure they fit snugly and align properly with the frame's edges. Apply gentle pressure to ensure a secure fit.

8. Secure with screws:
Once the lenses are in place, it's time to secure them with the small screws. Align the holes on the lenses with the screw holes on the frame and use the small screwdriver to tighten the screws. Take care not to overtighten, as it may damage the lenses or the frame.

9. Clean and polish:
After successfully replacing the lenses, give your sunglasses a final cleaning and polishing. Use the lens cleaner solution and the microfiber cloth to remove any smudges or fingerprints. This will leave your Ray Ban Elliot sunglasses looking as good as new!

10. Test and adjust:
Before you head out to show off your revamped sunglasses, it's important to test them for comfort and clarity. Put them on and check if they sit comfortably on your face. Also, ensure that your vision is clear and there are no distortions. If needed, make minor adjustments to the fit or alignment.

11. Care and maintenance:
To keep your newly replaced lenses in pristine condition, it's crucial to take proper care of your Ray Ban Elliot sunglasses. Store them in a protective case when not in use, clean them regularly with a microfiber cloth, and avoid placing them face down on hard surfaces. These simple steps will help prolong the lifespan of your sunglasses.

Congratulations! You've successfully replaced the lenses in your Ray Ban Elliot sunglasses. By following these step-by-step instructions, you've saved yourself the hassle and expense of buying a new pair. Now you can enjoy clear vision and stylish protection once again. Remember, with a little patience and the right tools, you can tackle many DIY projects like this. So go ahead, rock your revamped sunglasses, and let your eyes shine!