Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Replace Ray Ban Outdoorsman Lenses

So, you've been rocking your Ray Ban Outdoorsman sunglasses for a while now, and they've become your go-to accessory for any outdoor adventure. But, alas, the lenses have seen better days. Fear not! In this guide, we'll walk you through the process of replacing the lenses on your beloved Ray Ban Outdoorsman sunglasses. With a little bit of patience and the right tools, you'll have your shades looking as good as new in no time.

Gather the Necessary Tools
To get started, you'll need a few tools on hand:

1. Replacement lenses: Make sure you purchase lenses that are compatible with your specific model of Ray Ban Outdoorsman sunglasses. Check the dimensions and shape to ensure a proper fit.

2. Screwdriver: You'll need a small Phillips head screwdriver to remove the screws holding the lenses in place.

3. Tweezers: A pair of tweezers will come in handy for handling small parts and screws.

Remove the Old Lenses
Now that you have your tools ready, it's time to remove the old lenses. Follow these steps:

Step 1: Locate the screws: Look for the screws on the inner side of the sunglasses frame. They are usually located near the bridge or the temples.

Step 2: Unscrew the screws: Use your screwdriver to carefully unscrew the screws holding the lenses in place. Be gentle and make sure not to strip the screws.

Step 3: Remove the lenses: Once the screws are loose, gently slide out the old lenses from the frame. Take care not to scratch or damage the frame during this process.

Clean the Frame
Before installing the new lenses, it's a good idea to clean the frame to ensure a pristine fit. Here's how:

Step 1: Use a clean, lint-free cloth: Wipe down the frame with a soft, lint-free cloth to remove any dust or debris.

Step 2: Use a mild soap solution: If there are any stubborn stains or smudges, mix a small amount of mild soap with water and gently clean the frame using a soft cloth. Be sure to rinse off any soap residue afterward.

Install the New Lenses
Now that your frame is clean and ready, it's time to install the new lenses. Follow these steps:

Step 1: Align the lenses: Carefully align the replacement lenses with the frame, making sure they fit snugly into the lens grooves.

Step 2: Insert the screws: Using your screwdriver, gently insert the screws back into their respective holes. Be careful not to overtighten them, as this could damage the frame.

Step 3: Check for stability: Once the screws are in place, give the sunglasses a gentle shake to ensure the lenses are securely fastened.

Clean and Inspect
Congratulations! You've successfully replaced the lenses on your Ray Ban Outdoorsman sunglasses. Now it's time to give them a final cleaning and inspection:

Step 1: Clean the lenses: Use a microfiber cloth or a lens cleaning solution to clean the new lenses, removing any fingerprints or smudges.

Step 2: Inspect for any issues: Take a close look at the sunglasses to ensure there are no visible defects or misalignments. If you notice any problems, double-check the installation steps or consider seeking professional assistance.

Maintenance Tips
To keep your newly replaced lenses in top condition, here are a few maintenance tips:

1. Store your sunglasses in a protective case when not in use to prevent scratches.

2. Avoid placing your sunglasses face down on hard surfaces to prevent lens damage.

3. Clean the lenses regularly using a microfiber cloth or a lens cleaning solution.

4. Avoid using harsh chemicals or abrasive materials when cleaning the lenses.

Replacing the lenses on your Ray Ban Outdoorsman sunglasses may seem like a daunting task, but with the right tools and a little patience, it can be easily accomplished. By following the steps outlined in this guide, you'll be able to enjoy your favorite shades with brand new lenses. So, go ahead and give your sunglasses a fresh new look and get ready to conquer the great outdoors in style!