Use Promo Code SAVE10 To Get 10% Off Your First Order

How To Replace Ray Ban State Street Lenses

Hey there! Are you a proud owner of a stylish pair of Ray Ban State Street sunglasses? These shades are undoubtedly a fashion statement, but what happens when your lenses get scratched or damaged? Fear not, because in this article, we'll guide you through the process of replacing your Ray Ban State Street lenses. Whether you're a DIY enthusiast or just looking to save some money, we've got you covered. So, let's dive right in!

Why Replace Ray Ban State Street Lenses?
The Importance of Clear Vision

Having clear vision is essential for enjoying the full benefits of your Ray Ban State Street sunglasses. Over time, lenses can become scratched or damaged, affecting your ability to see clearly and diminishing the overall experience. By replacing the lenses, you can restore the visual clarity and ensure your sunglasses continue to provide optimal protection for your eyes.

Gathering the Necessary Tools
What You'll Need

Before you start the replacement process, make sure you have the following tools handy:
1. Microfiber cloth
2. Lens cleaner solution
3. Screwdriver (with a small flathead and Phillips head)
4. Replacement lenses (compatible with Ray Ban State Street sunglasses)
5. Tweezers (optional)

Removing the Old Lenses
Step-by-Step Guide

1. Lay a soft cloth on a flat surface to prevent any scratches while working.
2. Locate the screws on the frame of your sunglasses. These screws secure the lenses in place.
3. Use the appropriate screwdriver (flathead or Phillips head) to carefully remove the screws. Be gentle to avoid stripping or damaging the screws.
4. Once the screws are removed, gently push the lens from the backside to pop it out of the frame. Use tweezers if necessary to get a better grip.
5. Repeat the process for the other lens.

Cleaning the Frame
Preparing for New Lenses

Now that you've successfully removed the old lenses, it's time to clean the frame to ensure a smooth transition for the new lenses.

1. Dampen a microfiber cloth with lens cleaner solution.
2. Gently wipe the frame, paying attention to any dirt or residue that may have accumulated.
3. Allow the frame to air dry before proceeding to the next step.

Installing the New Lenses
Ensuring a Proper Fit

1. Take your new replacement lenses and inspect them for any defects or scratches.
2. Align the lenses with the frame, making sure they fit securely.
3. Carefully insert one lens at a time, starting from the front side, and push it gently into the frame. Ensure that the lens is properly seated.
4. Repeat the process for the other lens.

Securing the Lenses
Putting It All Together

1. Place the screws back into their respective holes on the frame.
2. Use the screwdriver to tighten the screws, but be cautious not to overtighten, as it may damage the frame.
3. Double-check that the lenses are securely fastened and aligned correctly.

Cleaning and Polishing
The Final Touch

1. Use a microfiber cloth to clean any smudges or fingerprints from the lenses.
2. Apply a small amount of lens cleaner solution to the cloth if necessary.
3. Gently polish the lenses in a circular motion until they are crystal clear.

Final Tips and Recommendations
Keep Your Shades Looking Sharp

1. Store your Ray Ban State Street sunglasses in a protective case when not in use to prevent scratches or damage.
2. Avoid placing your sunglasses face down on surfaces to minimize the risk of lens scratches.
3. Regularly clean your lenses with a microfiber cloth to maintain their clarity.
4. Consider using lens cleaner solution specifically designed for sunglasses to ensure effective cleaning without damage.

Congratulations! You've successfully replaced the lenses of your Ray Ban State Street sunglasses. By following these simple steps, you can enjoy clear vision and extend the lifespan of your favorite shades. Remember to take good care of your sunglasses to keep them looking sharp. Now, go out and rock your stylish Ray Bans with confidence!